Hole S97-O8A (15.50W, 100 S, AZ 180 deg., 60 deg dip)  Cross Section and Plan View

Interval

Metres

Core Length

(m) (ft.)

Copper

(%)

Zinc

(%)

Cobalt

(%)

Silver

(oz/t)

Gold

(oz/t)

482.4 – 485.0

2.6 / 8.53

2.46

1.88

NA

.750

NA

488.4 – 494.9

6.9 / 22.57

1.52

3.98

NA

.640

NA

502.6 - 506.2

3.6 / 11.8

3.74

2.49

NA

1.11

NA

TOTAL -

13.1 / 43.0

2.32

3.14

NA

.790

NA

(avg)

(avg)

(avg)

537.4 – 543.7

6.3 / 20.9

0.27

0.65

0.12

included in the assays noted above were the following high – grade sections:

482.4 –483.9

1.5 / 4.92

3.62

3.19

0.136

.86

.005

491.86 –494.4

2.54 / 8.33

2.33

9.09

0.073

1.08

.001

504.2 –506.2

2.0 / 6.56

6.60

4.37

0.082

1.91

.022

489.00-494.4

5.40 / 17.7

1.72

4.93

0.073

0.73

Hole S97-09 (16.10W, 630S, Az 350 deg, 60 deg dip) collared 230 feet west on strike from the preliminary discovery hole S97-08A.     Cross Section and Plan View

604.6 – 627.5

22.9 / 75.13

2.65

2.70

0.083

0.76

included in the assays noted above are the following high – grade intervals:

613.6 - 623.0

9.4 / 30.84

3.86

4.57

0.128

1.126

.023

618.6 – 623.0

4.4 / 14.44

3.80

7.02

0.133

1.153

.034

Values ranged up to 12.12 % Zn and 7.55 % Cu.

Hole S98-01 (17.25W.675S.Az 355 deg.dip-60 deg) drilled 50 metres (164 ft.) west from hole S97-10.
                                   Cross Section and Plan View

695.15-702.9

7.75 / 25.4

5.34

3.24

0.067

1.16

NA

Incl.

695.15 - 700.4

5.25 / 17.2

7.81

4.76

0.096

1.69

NA

773.50-776.5

3.00 / 9.8

2.17

3.90

0.047

0.46

NA

774.35-776.5

2.15 / 7.1

2.95

5.42

0.053

0.61

NA

Hole S98-05 (15+85W, 575S, Az 350, dip-60) was targeted to test the continuity of the mineralized Cu-Zn-Co system to 200+ feet west of the massive sulphides of previously drilled hole #S97-08A.
Cross Section and Plan View

420.12-423.75

3.63 / 11.9

2.69

0.29

0.079

0.49

NA

507.40-519.70

12.3 / 40.4

1.53

2.05

0.131

0.42

NA

Incl.

513.00-519.70

6.70 / 22.0

2.14

2.47

0.174

0.58

NA

515.00-519.70

4.70 / 15.4

2.54

3.38

0.168

0.70

NA

516.00-519.70

3.70 / 12.1

2.75

3.74

0.165

0.73

NA

Hole S98-06 (16+30W, 630S, Az350, dip-60) was targeted to test the continuity of the mineralized Cu-Zn-Co system midway (strike and depth) between the MASU intervals of holes S97-09 and S98-01 previously drilled.     Cross Section and Plan View

653.90 - 680.66

26.76 / 87.80

2.57

1.68

0.082

0.61

NA

Incl.

653.96 - 665.50

11.60 / 38.06

4.34

2.18

0.122

0.94

NA

653.90 - 663.49

9.59 / 31.46

5.01

2.63

0.131

1.09

NA

2nd. Interval

696.62 - 705.30

8.68 / 28.48

3.39

0.80

0.071

0.67

NA

Incl.

696.62 - 703.00

6.38 / 20.93

4.46

1.06

0.094

0.89

NA

Hole S99-01A

Hole S99-01A (17+60W, 975S, Az345, dip-60) was targeted to test the downward continuity of the Cu-Zn-Co sulphide mineralized mine horizon at 1000 ft. below the previously drilled massive sulphide (MASU) intersections.
Cross Section and Plan View

1171.9 -1179.72

7.82 / 25.66

1.96

3.18

0.085

0.53

NA

Incl.

1171.9 - 1176.40

4.50 / 14.76

1.98

4.55

0.098

0.61

NA

1171.9 - 1175.2

3.30 / 10.83

2.19

5.96

0.116

0.71

NA

3^rd Interval

1165.2 - 1166.2

1.00 / 3.28

1.26

1.18

0.036

0.29

NA

2^nd Interval

1161.0 - 1162.0

1.00 / 3.28

1.71

0.46

0.037

0.34

NA

1^st Interval

1158.4 - 1159.95

1.55 / 5.09

2.11

1.40

0.093

0.50

NA

[highest single assay: Cu@4.13%, Zn@7.78%, Co@0.160%,]

Hole S99-05

Hole S99-05 (branch wedged to the east off hole S99-03) was targeted to test the West extension of the Cu-Zn-Co MASU intersection of hole S99-01A between holes S99-01A and S99-03 at a 50 meter (164ft.) horizontal step-out from S99-01A.

1172.39 - 1176.8

4.41 / 14.47

1.34

1.57

0.065

NA

NA

Incl.

1172.39 - 1175.0

2.61 / 8.56

1.58

1.94

0.043

NA

NA

[highest single assay: Cu@3.06%, Zn@2.90%, Co@0.065%,]

  Drill

Hole

(#) .

MASU

Interval

Meters 

Core Length
 
 

(M) (Ft)

Cu
 
 

(%)

Zn
 
 

(%)

Co
 
 

(%)

Ag
 
 

(oz/t)

S97-08A

489.00-494.40

5.40 / 17.70

1.72

4.93

0.073

0.73

S98-05

507.40-519.70

12.30/40.36

1.53

2.05

0.131

0.42

S97-09

604.60-627.50

22.90 / 75.13

2.65

2.70

0.083

0.76

S98-06

653.90-680.66

26.76 / 87.80

2.57

1.68

0.082

0.61

S98-01

695.15-702.90

7.75 / 25.40

5.34

3.24

0.067

1.16

S99-01A

1171.9 -1179.72

7.82 / 25.66

1.96

3.18

0.085

0.53

Drill

Ore Interval

Vertical

S97-08A

5.40 / 17.70

425.8 / 1397.2

S97-05

12.30 / 40.36

444.7 / 1459.2

S97-09

22.90 / 75.13

533.5 / 1750.4

S98-06

26.76 / 87.80

578.1 / 1896.1

S98-01

7.75 / 25.40

605.4 / 1986.2

S99-01A

7.82 / 25.66

914.0 / 2998.8

82.93 / 272.05